Bench-level explanations: which step changes the result, which does not, and how to tell the difference with your own samples.
Written for people running the protocol, not for a literature review — every note names the parameter that matters and the range it should stay in.
Three routes, three different demands on the sample. Negative selection needs every non-target population to be covered by the cocktail; positive selection needs only enough surface CD8 for the beads to bind. Hands-on time, throughput, debris background and column loading limits compared, with three workflow diagrams and a four-criteria decision flow.
English summaryThe four questions that decide whether a separation is interpretable: how many cells to load, what PBMC yield to expect per millilitre of blood, how much of the antigen epitope the bead occupies, and which recovery formula applies to which format.
English summaryA side-by-side test of the mouse naive CD8⁺ kit with and without ACK lysis: purity stayed at 97.8% without lysis, so the lysis step can be dropped when cell numbers are limiting — with the caveat that debris load rises and the gate strategy has to absorb it.
English summaryTimed, same-sample comparison of the two protocols end to end, including the incubation and centrifugation steps that dominate the difference, plus the viability and purity readouts that make the shorter protocol worth choosing.
English summaryGr-1 is an epitope shared by Ly6G and Ly6C, not a single marker. This note walks through the three names, which clones recognise which, and how the choice changes the neutrophil-versus-monocyte split in mouse myeloid panels.
English summaryWhy the washing step exists in the classical protocol, what it costs in cell loss and handling time, and how the no-wash format changes the working range — with the imported-reagent comparison run alongside.
English summaryStarting frequency, whether the target antigen is also the readout, and how sensitive the downstream assay is to cross-linking decide this before brand does. A decision rule with the numbers behind it.
English summaryBoth formats answer different questions. Below roughly 10% starting frequency the depletion cocktail runs out of room and a column becomes the practical route; above 30% column-free negative selection is faster and gentler.
English summaryThe dimensions worth comparing when specifying a separation: purity at a stated starting frequency, recovery, viability, bead size and epitope occupancy, format, time, and whether the same reagent also works as a depletion tool.
English summaryThe IFN-γ/T-bet axis, the cytokine and antibody combination that drives it, the timing that matters, and the readouts that distinguish true polarisation from partial activation.
English summaryCD4⁺CD25⁺FoxP3⁺ induction in vitro: TGF-β and IL-2 requirements, the role of TCR strength, and how to verify suppressive function rather than just FoxP3 percentage.
English summaryDye dilution halves with each division, producing the staircase of peaks used to reconstruct proliferation history. Labelling concentration, quenching, stimulation strength and the flow setup that keeps the peaks resolvable.
English summaryFrom CAR vector delivery and T-cell expansion through target-cell preparation, effector-to-target design and in vivo readout — the long-form protocol with the points where models most often fail.
English summaryPBMC preparation, negative selection, CD3/CD28 activation, expansion kinetics and the checkpoints that tell you the culture is still healthy.
English summaryMouse T cells are harder to transduce than human cells: activation state, envelope choice, spinoculation and IL-2 timing all matter. A practical sequence with the failure modes named.
English summary14 articles in this section. Every article has an English page — each card opens it, with the same figures and the same caveats.
Tell us your cell type, sample source and downstream assay — we will suggest an isolation route, a culture condition and the matching catalogue numbers.